Shaft Sleeve

Material	Premium quality tungsten carbide
Dureza	Typically in the range of 14.4 – 15.0 g/cm³
Bending Strength	Usually between 600 – 900 Mpa
Wear Resistance Index	≥0.05 mm³ (ASTM G65 standard)
Surface Roughness	Ra 0.4 μm – Ra 0.8 μm
Operating Temperature	Up to 1000°C
Dimensions	Customized to specific needs, with diameters ranging from a few mm to hundreds of mm, and in a variety of lengths and shapes.
Surface Treatment	Precision grinding, polishing and other treatments to achieve the required dimensional accuracy and surface roughness. Some products can also be coated to enhance abrasion or corrosion resistance.

Material: High quality cemented carbide has extremely high hardness and wear resistance.
Resistencia a altas temperaturas: Can maintain stable performance under high temperature environment.
Resistencia a la corrosión: Good corrosion resistance to acid, alkali and other chemical substances.
Precision processing: Advanced processing technology is adopted to ensure dimensional accuracy and surface quality.
Easy installation: Reasonable design, easy to disassemble and replace, reduce maintenance time.
Strong adaptability: Suitable for various working environments, including high temperature, corrosive media and other harsh conditions.

Pumps and valves: Used to protect the contact surface between the shaft and the bearing housing to reduce wear and leakage.
Machinery: Used in bearings, guide rails and other components to improve the efficiency of mechanical operation.
Automobile: Used in engine, gearbox and other key components for wear protection.
Metallurgy: Bearings and seals for high temperature and heavy load environments.
Aerospace: Bearings and seals for engines, rockets and other high-precision equipment.

Preparation: Make sure the mounting surface is clean and free of oil.
Measurement: Select the appropriate shaft sleeve size according to the specifications of the shaft.
Installation process: Follow the instructions in the manual to ensure that the installation is secure.
Inspection and confirmation: Check after installation to ensure that there is no looseness.

Regular inspection: Regularly check the wear and tear of the shaft sleeve.
Timely replacement: Replace the shaft sleeve in time when it is found to be seriously worn to avoid damaging the equipment.
Cleaning and maintenance: Regularly clean the impurities attached to the shaft sleeve.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Shaft Sleeve”